This high-performance Aluminum 6061 seamless pipe, conforming to Schedule 80 specifications, offers superior strength and corrosion resistance for critical industrial fluid and gas conveyance systems.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Pipe Size | 5.9" |
| Outside Diameter | 3.040" |
| Wall Thickness | 0.354" |
Built to exacting engineering tolerances, this Aluminum 6061 seamless pipe features a nominal pipe size of 5.9 inches, an outside diameter of 3.040 inches, and a robust 0.354-inch wall thickness. The 6061 alloy provides an excellent balance of strength, weldability, and corrosion resistance, making it suitable for demanding environments. This pipe is engineered for applications where reliability and long-term performance are paramount, resisting deformation under pressure and environmental stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect pipe ends for damage or debris. 2. Ensure proper mating surfaces and appropriate joining method (e.g., welding, flanging) are selected based on application pressure and media. 3. Execute joining procedure according to industry best practices and material specifications for Aluminum 6061.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect joining methods not suitable for Aluminum 6061. | Always consult welding or joining specifications specific to Aluminum 6061 to ensure material integrity and joint strength. |
| Failure to properly clean pipe ends before joining. | Thoroughly clean pipe ends with an appropriate solvent to remove oils, dirt, and oxides, ensuring a clean and strong bond. |
A: This Seamless Pipe, Schedule 80 is manufactured from Aluminum 6061.
A: Aerospace structural components, Marine applications, High-pressure fluid transfer.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||