High-strength, corrosion-resistant Aluminum 6061 seamless pipe, Schedule 80 rated. Engineered for demanding fluid transport and structural applications where reliability is paramount.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Pipe Size | 0.5" |
| Outside Diameter | 4.902" |
| Wall Thickness | 0.456" |
Precision-manufactured to tight tolerances, this Aluminum 6061 seamless pipe adheres to Schedule 80 specifications, ensuring consistent wall thickness and dimensional accuracy. With a nominal pipe size of 0.5", it features an outside diameter of 4.902" and a substantial wall thickness of 0.456". Aluminum 6061 alloy offers an excellent balance of strength, corrosion resistance, and weldability, making it suitable for a wide range of industrial environments. Its lightweight nature combined with robust mechanical properties facilitates efficient handling and installation in critical systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper pipe preparation, including deburring and cleaning of cut ends. 2. Use compatible fittings and appropriate joining methods (e.g., welding, brazing) according to industry standards. 3. Perform pressure testing to verify system integrity before commissioning.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect joining methods for aluminum alloys. | Consult material specifications and use only approved welding or brazing procedures for Aluminum 6061. |
| Failure to properly support the pipe, leading to stress or vibration. | Install adequate pipe supports at appropriate intervals to prevent sagging and minimize stress concentration. |
A: This Seamless Pipe, Schedule 80 is manufactured from Aluminum 6061.
A: Hydraulic fluid transfer systems, Pneumatic lines, Structural components in corrosive environments, Marine applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||