This Aluminum 6061 Schedule 80 seamless pipe offers superior corrosion resistance and a high strength-to-weight ratio. Engineered for demanding applications requiring both durability and reduced mass.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Pipe Size | 1.2" |
| Outside Diameter | 2.951" |
| Wall Thickness | 0.273" |
Specified by design engineers worldwide, this Aluminum 6061 seamless pipe meets rigorous performance standards. With a nominal size of 1.2 inches, it features an actual outside diameter of 2.951 inches and a substantial wall thickness of 0.273 inches, defining its Schedule 80 rating. Aluminum 6061 is an alloy known for its excellent weldability, formability, and moderate to high strength. Its inherent corrosion resistance makes it suitable for environments exposed to moisture or chemical agents. This configuration is ideal for structural components, fluid conveyance systems in marine and aerospace industries, and high-pressure applications where weight reduction is critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect pipe ends for damage, burrs, or foreign matter. 2. Prepare joint surfaces according to applicable welding or fitting standards for Aluminum 6061. 3. Install using appropriate joining methods (e.g., welding, threaded fittings) ensuring proper alignment and seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect welding consumables or procedures for Aluminum 6061, leading to weak joints. | Utilize welding filler metals specifically recommended for 6061 aluminum (e.g., 4043 or 5356) and adhere strictly to established welding parameters for this alloy. |
| Overheating the aluminum pipe during fabrication, which can negatively affect its mechanical properties. | Employ controlled heat input during welding and forming processes. Consider heat sinks where appropriate to dissipate excess heat. |
A: This Seamless Pipe, Schedule 80 is manufactured from Aluminum 6061.
A: Aerospace structural components, Marine fluid systems, High-pressure lightweight piping.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||