This high-performance industrial Silicone O-ring, crafted from Aluminum 6061, ensures superior sealing in extreme environments. Its precise dimensions guarantee a leak-proof fit for critical applications.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 8.535" |
| Outside Diameter | 10.233" |
| Cross Section | 0.094" |
Engineered for reliability and performance, this Industrial O-Ring features an inside diameter of 8.535 inches, an outside diameter of 10.233 inches, and a cross-section of 0.094 inches. The Aluminum 6061 material offers excellent corrosion resistance and good mechanical strength, making it suitable for moderate pressure and temperature sealing applications where chemical compatibility with silicone is paramount. Its Shore A hardness of typically 50-70 provides a balance of flexibility and compression set resistance. Ideal for use in fluid power systems, chemical processing equipment, and general industrial sealing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean mating surfaces thoroughly to remove any debris or contaminants. 2. Carefully position the O-ring within its groove, ensuring it is seated evenly and without twisting. 3. Apply a thin layer of compatible lubricant to the O-ring and groove if recommended for the specific application to facilitate assembly and prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong size O-ring. | Always verify the O-ring's inside diameter, outside diameter, and cross-section against the groove dimensions before installation. |
| Twisting or damaging the O-ring during installation. | Install the O-ring carefully, ensuring it is seated squarely in the groove without stretching or pinching. |
| Installing on dirty or damaged surfaces. | Thoroughly clean and inspect mating surfaces for any nicks, burrs, or contamination that could compromise the seal. |
A: This Industrial O-Ring, Silicone is manufactured from Aluminum 6061.
A: Fluid power systems (hydraulic and pneumatic), Chemical processing equipment, General industrial sealing applications requiring moderate pressure and temperature resistance.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||