This industrial O-ring, crafted from robust Aluminum 6061, offers superior sealing performance in demanding environments. Engineered for reliability and durability, it ensures leak-free operation in critical applications.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 9.902" |
| Outside Diameter | 7.147" |
| Cross Section | 0.227" |
Precision-manufactured to tight tolerances, this Silicone O-ring features an Inside Diameter (ID) of 9.902 inches, an Outside Diameter (OD) of 7.147 inches, and a Cross Section (CS) of 0.227 inches. Constructed from Aluminum 6061, it provides excellent corrosion resistance and mechanical strength, suitable for high-pressure and extreme temperature applications where standard elastomers may degrade. The material's inherent properties ensure consistent sealing and longevity in chemical processing, automotive, and aerospace industries.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mating surfaces are clean and free of debris. 2. Carefully insert the O-ring into its designated groove, avoiding stretching or twisting. 3. Apply a thin layer of compatible lubricant if necessary for easier assembly and to prevent damage.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners during assembly, which can crush the O-ring. | Follow recommended torque specifications for all fasteners to ensure proper compression without damaging the seal. |
| Using incompatible lubricants or cleaning agents that degrade the Silicone material. | Consult the O-ring material compatibility chart and use only approved lubricants and cleaning solutions. |
A: This Industrial O-Ring, Silicone is manufactured from Aluminum 6061.
A: High-pressure hydraulic systems, Chemical processing equipment, Aerospace and automotive fluid containment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||