This industrial O-ring, crafted from robust Aluminum 6061, offers exceptional sealing performance. Its precise dimensions ensure reliable operation in a wide range of challenging environments.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 2.275" |
| Outside Diameter | 0.551" |
| Cross Section | 0.074" |
Built to exacting engineering tolerances, this silicone O-ring features an inside diameter of 2.275 inches, an outside diameter of 0.551 inches, and a cross-section of 0.074 inches. The Aluminum 6061 material provides excellent corrosion resistance and good mechanical strength, making it suitable for applications requiring a balance of sealing integrity and material durability. Its silicone composition offers a broad temperature range and good resistance to many chemicals. Ideal for static and dynamic sealing in fluid power, automotive, and aerospace systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating groove is clean, dry, and free from debris or sharp edges. 2. Carefully lubricate the O-ring with a compatible lubricant if required by the application. 3. Gently place and seat the O-ring into its designated groove, avoiding stretching or twisting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-stretching the O-ring during installation, leading to premature failure and leakage. | Install the O-ring without excessive tension, ensuring it fits snugly but not distorted in the groove. |
| Using incompatible lubricants, which can degrade the silicone material and compromise the seal. | Consult material compatibility charts to select a lubricant specifically approved for silicone and the operating environment. |
A: This Industrial O-Ring, Silicone is manufactured from Aluminum 6061.
A: Fluid power systems, Automotive engine components, Aerospace fuel and hydraulic systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||