This industrial O-ring, crafted from Aluminum 6061, offers robust sealing capabilities. Its precise dimensions ensure a reliable fit in critical applications requiring superior performance and durability.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 7.974" |
| Outside Diameter | 7.987" |
| Cross Section | 0.271" |
A high-performance industrial component, this O-ring is precision-engineered from Aluminum 6061, a widely used alloy known for its strength, corrosion resistance, and machinability. With an inside diameter of 7.974 inches, an outside diameter of 7.987 inches, and a substantial cross-section of 0.271 inches, it is designed for demanding sealing applications where dimensional stability and resilience are paramount. Its material properties make it suitable for environments that may experience moderate temperatures and pressures, ensuring a secure and long-lasting seal.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sealing groove is clean, free of debris, and properly dimensioned. 2. Carefully lubricate the O-ring and groove with a compatible lubricant. 3. Gently install the O-ring, avoiding any twisting or stretching, to achieve a flush fit within the groove.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to O-ring damage. | Apply lubricant and use controlled, even pressure to seat the O-ring. |
| Installing on a dirty or damaged sealing surface. | Thoroughly clean the groove and inspect for any nicks or burrs before installation. |
A: This Industrial O-Ring, Silicone is manufactured from Aluminum 6061.
A: Hydraulic and pneumatic systems, Fluid power equipment, Machinery and equipment housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||