This Aluminum 6061 deep groove ball bearing offers exceptional load-bearing capacity and smooth operation. Its lightweight and corrosion-resistant properties make it ideal for specialized power transmission systems.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 99mm |
| Outside Diameter | 129mm |
| Width | 29mm |
Manufactured under strict quality controls, this deep groove ball bearing features an inside diameter of 99mm, an outside diameter of 129mm, and a width of 29mm. Constructed from Aluminum 6061, it provides a superior strength-to-weight ratio and excellent corrosion resistance, making it suitable for environments where traditional steel bearings may degrade. The precise internal geometry ensures optimal raceway contact, minimizing friction and heat generation for extended service life and efficient power transfer in demanding industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into its housing, applying even pressure to the outer or inner ring respectively. 3. Verify free rotation and check for any signs of binding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the bearing cage during installation. | Apply force only to the ring being pressed onto the shaft or into the housing. |
| Incorrect shaft or housing fit, leading to premature wear. | Ensure the shaft and housing dimensions are within the specified tolerances for the bearing. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Lightweight machinery components, Corrosion-resistant drive systems, Aerospace and marine applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||