This deep groove ball bearing, crafted from lightweight Aluminum 6061, offers exceptional corrosion resistance and excellent machinability. Engineered for precise rotational control in demanding power transmission applications.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 96mm |
| Outside Diameter | 36mm |
| Width | 31mm |
Built to exacting engineering tolerances, this deep groove ball bearing features an inside diameter of 96mm, an outside diameter of 36mm, and a width of 31mm. The Aluminum 6061 alloy provides a superior strength-to-weight ratio, making it ideal for applications where weight reduction is critical. Its inherent corrosion resistance ensures longevity in various environmental conditions, and its excellent thermal conductivity aids in heat dissipation. Designed for smooth, low-friction operation, it reliably handles radial and axial loads, making it suitable for electric motors, gearboxes, and automated machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing surfaces are clean and free from debris. 2. Carefully press or gently tap the bearing onto the shaft, ensuring it is seated squarely. 3. Align the bearing with the housing bore and carefully press or tap it into place until fully seated.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing installation with excessive impact. | Use a bearing press or a soft-faced hammer for controlled and even force application. |
| Improper alignment during installation, leading to uneven loading. | Visually inspect alignment before and during pressing to ensure the bearing is entering the bore or seating on the shaft without cocking. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Lightweight electric motor assemblies, High-speed fan units, Automated material handling systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||