This deep groove ball bearing, precision machined from corrosion-resistant Aluminum 6061, offers exceptional performance in power transmission. Its specific dimensions ensure optimal load distribution and smooth rotational dynamics.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 94mm |
| Outside Diameter | 96mm |
| Width | 45mm |
Built to exacting engineering tolerances, this deep groove ball bearing features an inside diameter of 94mm, an outside diameter of 96mm, and a width of 45mm. Constructed from Aluminum 6061, it provides a superior strength-to-weight ratio and excellent corrosion resistance, making it ideal for environments where traditional steel bearings may degrade. The tight internal clearances and raceway geometry are optimized for high radial and moderate axial loads, ensuring efficient power transfer and extended service life in demanding industrial machinery and automation systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean bearing and mating shaft/housing surfaces thoroughly. 2. Carefully press the bearing onto the shaft or into the housing, ensuring alignment. 3. Verify smooth rotation without binding after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation. | Use a hydraulic press or bearing induction heater for controlled installation, avoiding impact loads on the bearing races. |
| Incorrect shaft or housing fit. | Ensure the shaft and housing have the recommended interference or clearance fits for optimal bearing performance and lifespan. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Industrial Conveyor Systems, Automated Manufacturing Equipment, High-Speed Robotics.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||