This deep groove ball bearing, fabricated from lightweight Aluminum 6061, offers superior corrosion resistance. Precisely engineered for efficient power transmission in demanding environments where weight is a critical factor.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 87mm |
| Outside Diameter | 34mm |
| Width | 47mm |
Built to exacting engineering tolerances, this deep groove ball bearing features an inner diameter of 87mm, an outer diameter of 34mm, and a width of 47mm. The Aluminum 6061 alloy construction provides a significant weight reduction compared to steel alternatives while maintaining excellent corrosion resistance and moderate strength. This makes it ideal for applications exposed to moisture or corrosive agents. Its robust design ensures smooth rotational performance and long service life under typical radial and axial loads, minimizing friction and energy loss in power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even force to the correct ring (outer ring into housing, inner ring onto shaft). 3. Verify that the bearing rotates freely and without binding after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the wrong ring during press-fitting. | Always apply pressing force to the ring (inner or outer) that is directly contacting the shaft or housing, respectively, to avoid deforming the bearing races. |
| Contaminating the bearing during installation. | Handle the bearing with clean hands or tools and avoid exposing it to dust, dirt, or moisture during the installation process. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Lightweight machinery components, Marine equipment, Food processing machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||