This robust deep groove ball bearing, fabricated from lightweight yet strong Aluminum 6061, is engineered for reliable power transmission in demanding environments. Its precision construction ensures smooth, efficient operation and extended service life.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 83mm |
| Outside Diameter | 155mm |
| Width | 44mm |
Precision-manufactured to tight tolerances, this deep groove ball bearing features an inside diameter of 83mm, an outside diameter of 155mm, and a width of 44mm. The utilization of Aluminum 6061 alloy provides an excellent strength-to-weight ratio, making it suitable for applications where weight reduction is critical without compromising load-bearing capacity. This material also offers good corrosion resistance. The deep groove geometry allows for high radial and axial loads in both directions, ensuring versatility in power transmission systems. Ideal for use in conveyors, electric motors, and industrial machinery where lightweight, durable bearing solutions are required.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing housing and shaft thoroughly to remove any debris or contaminants. 2. Carefully press the bearing into its designated housing, ensuring it is seated squarely and without tilting. 3. Mount the shaft into the bearing, applying even pressure and ensuring proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing during installation, leading to brinelling or deformation of the races. | Use a proper bearing press or a suitable drift to apply even pressure on the bearing's outer ring (when pressing into housing) or inner ring (when pressing onto shaft). |
| Inadequate lubrication, resulting in premature wear and overheating. | Ensure the bearing is adequately lubricated with the correct type and amount of grease or oil specified for the application and operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Conveyor Systems, Electric Motor Shafts, Industrial Machinery Gearboxes.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||