Engineered from lightweight and corrosion-resistant Aluminum 6061, this deep groove ball bearing offers exceptional performance in power transmission systems. Its precise dimensions ensure smooth, reliable operation and reduced wear.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 77mm |
| Outside Diameter | 51mm |
| Width | 33mm |
Manufactured under strict quality controls, this deep groove ball bearing features an inside diameter of 77mm, an outside diameter of 51mm, and a width of 33mm. Constructed from Aluminum 6061, it provides a superior strength-to-weight ratio and excellent corrosion resistance, making it ideal for environments where traditional steel bearings may degrade. This material choice also contributes to reduced rotational inertia, enhancing efficiency in high-speed applications. Its design accommodates radial and axial loads, ensuring robust performance in diverse power transmission assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from contaminants. 2. Carefully align the bearing with the shaft, applying even pressure during insertion. 3. Secure the bearing within its housing using appropriate retaining methods as per system design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or housing damage. | Use a bearing press or induction heater for controlled, even pressure application, or a suitable sleeve for gentle tapping. |
| Incorrect lubrication selection or insufficient lubrication, causing premature wear. | Consult lubrication charts for Aluminum 6061 components and the specific operating conditions to select the appropriate grease or oil. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Electric Motors, Gearboxes, Conveyor Systems, Aerospace Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||