Engineered from corrosion-resistant Aluminum 6061, this deep groove ball bearing offers a lightweight yet robust solution for power transmission. Its precise dimensions ensure smooth operation and reliability in diverse industrial settings.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 66mm |
| Outside Diameter | 37mm |
| Width | 6mm |
Designed for demanding industrial environments, this deep groove ball bearing features an inside diameter of 66mm, an outside diameter of 37mm, and a width of 6mm. Constructed from Aluminum 6061, it provides excellent corrosion resistance and a significantly lower weight compared to steel alternatives, making it ideal for applications where weight reduction or non-magnetic properties are critical. The material's inherent strength ensures reliable performance under moderate loads, contributing to extended service life in food processing machinery, marine equipment, and chemical handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing bore and shaft are clean and free from contaminants. 2. Gently press or lightly tap the bearing onto the shaft, ensuring even pressure on the inner ring. 3. Secure the bearing in its housing, verifying proper seating and axial retention.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring during shaft installation | Always apply installation force to the inner ring when mounting onto the shaft to prevent brinelling and damage to the raceways. |
| Over-tightening retaining elements | Ensure retaining rings or housings are snug but do not exert excessive force that could distort the bearing or preload it unevenly. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Food Processing Equipment, Marine Environments, Lightweight Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||