Engineered for optimal performance in power transmission systems, this deep groove ball bearing is constructed from lightweight and corrosion-resistant Aluminum 6061. Its precise dimensions ensure smooth operation and reliable load bearing.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 59mm |
| Outside Diameter | 182mm |
| Width | 32mm |
A high-performance industrial component, this deep groove ball bearing boasts an inside diameter of 59mm, an outside diameter of 182mm, and a width of 32mm, conforming to standard bearing geometries for universal compatibility. The substrate material, Aluminum 6061, offers superior strength-to-weight ratio and excellent corrosion resistance, making it ideal for environments where traditional steel bearings may degrade. This alloy's inherent properties facilitate efficient heat dissipation and contribute to reduced rotational inertia, enhancing energy efficiency in high-speed applications. The bearing's design provides exceptional radial and axial load support, ensuring long service life in demanding power transmission scenarios.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free of debris. 2. Carefully press the bearing into its housing, applying even pressure to the outer ring. 3. Verify smooth rotation by hand after installation to confirm proper seating.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening or applying force to the inner ring during press-fit onto a shaft. | Always apply press-fit force exclusively to the outer ring when installing into a housing, and to the inner ring when mounting onto a shaft to prevent raceway damage. |
| Using incorrect lubrication or insufficient lubricant. | Consult the bearing manufacturer's specifications for the appropriate lubricant type and quantity to ensure optimal performance and lifespan. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Industrial Gearboxes, Electric Motor Shafts, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||