This deep groove ball bearing, crafted from lightweight and corrosion-resistant Aluminum 6061, offers exceptional performance in demanding power transmission applications. Its precise dimensions ensure smooth, low-friction rotation with reduced rotational inertia.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 53mm |
| Outside Diameter | 62mm |
| Width | 44mm |
Precision-manufactured to tight tolerances, this deep groove ball bearing features an inside diameter of 53mm, an outside diameter of 62mm, and a width of 44mm. Constructed from Aluminum 6061, it provides excellent corrosion resistance, superior strength-to-weight ratio, and good thermal conductivity, making it ideal for applications where weight reduction and non-magnetic properties are critical. Its design is optimized for high-speed operation and radial loads, minimizing vibration and heat generation. The material choice also offers advantages in environments where traditional steel bearings may be susceptible to chemical degradation or where weight is a primary design consideration.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free of debris. 2. Carefully align the bearing with the shaft and housing, applying even pressure for insertion. 3. Secure the bearing using appropriate retaining rings or shaft collars, ensuring no excessive stress is applied.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing during installation, leading to brinelling of the raceways. | Use a proper bearing puller/installer or heat/chill methods to ensure a smooth, interference-free fit. |
| Installing the bearing in a contaminated environment, introducing abrasive particles. | Perform installation in a cleanroom or meticulously clean workspace, keeping bearing packaging sealed until just before installation. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Lightweight robotic arm joints, High-speed medical equipment spindles, Corrosion-resistant pump shafts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||