This deep groove ball bearing, crafted from lightweight and corrosion-resistant Aluminum 6061, offers reliable performance in power transmission applications. Its precise dimensions ensure smooth operation and extended service life.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 53mm |
| Outside Diameter | 135mm |
| Width | 16mm |
A proven choice for industrial professionals, this deep groove ball bearing boasts an inside diameter of 53mm, an outside diameter of 135mm, and a width of 16mm. Constructed from Aluminum 6061, it provides excellent corrosion resistance and a significantly lower weight compared to steel alternatives, making it ideal for applications where weight reduction is critical. Its robust design ensures efficient load distribution and reduced friction, contributing to enhanced system efficiency and longevity in diverse industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the outer or inner ring respectively. 3. Verify free rotation after installation; if stiff, reassess alignment and seating.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the rolling elements during installation. | Always apply force to the ring that is being pressed into its mating component (inner ring to shaft, outer ring to housing). |
| Incorrect shaft or housing fit, leading to premature wear or bearing failure. | Ensure shaft and housing tolerances are within specified ranges for a snug but not overly tight fit. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Lightweight machinery components, Corrosion-prone environments, Electric motor assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||