This deep groove ball bearing, constructed from lightweight and corrosion-resistant Aluminum 6061, is designed for demanding power transmission roles. It offers smooth operation and durable performance in a compact form factor.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 44mm |
| Outside Diameter | 34mm |
| Width | 39mm |
Engineered for reliability and performance, this deep groove ball bearing boasts an inside diameter of 44mm, an outside diameter of 34mm, and a width of 39mm. The Aluminum 6061 alloy provides excellent strength-to-weight ratio and inherent corrosion resistance, making it suitable for environments where traditional steel bearings may be susceptible to degradation. Its robust design ensures efficient load distribution and minimal friction, contributing to extended operational life in dynamic power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free of debris. 2. Carefully press the bearing into its housing, applying even force to the outer ring. 3. Verify smooth rotation after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the inner ring during press-fit installation. | Always apply force to the component that is being press-fit. For mounting into a housing, apply force to the outer ring. For mounting onto a shaft, apply force to the inner ring. |
| Contaminating the bearing during installation. | Keep the bearing in its original packaging until ready for installation and use clean tools and handling procedures. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Lightweight machinery components, Robotics and automation, Aerospace and drone systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||