This lightweight deep groove ball bearing, crafted from Aluminum 6061, offers exceptional corrosion resistance and reduced inertia for demanding power transmission applications. Its precise design ensures smooth operation and long service life.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 44mm |
| Outside Diameter | 32mm |
| Width | 7mm |
Precision-manufactured to tight tolerances, this deep groove ball bearing features an internal bore diameter of 44mm and an external diameter of 32mm, with a width of 7mm. Constructed from Aluminum 6061, it provides a superior strength-to-weight ratio and excellent resistance to corrosion, making it ideal for environments where traditional steel bearings may degrade. Its lightweight nature contributes to reduced system mass and improved energy efficiency. The optimized raceway geometry ensures high radial and axial load capacity, while the inherent damping properties of aluminum can contribute to quieter operation in certain applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting bore and shaft are clean and free of debris. 2. Gently press the bearing into the housing or onto the shaft, using appropriate tooling to apply even pressure. 3. Verify smooth rotation and proper seating of the bearing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling of the raceways. | Use a controlled press fit or bearing heater for installation, ensuring force is applied to the correct ring. |
| Improper lubrication or using incompatible lubricants, compromising bearing life. | Consult the bearing manufacturer's specifications for recommended lubricant types and re-greasing intervals. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Aerospace components, Lightweight machinery, Marine equipment, Automotive subsystems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||