Engineered for efficiency in power transmission, this Aluminum 6061 deep groove ball bearing offers exceptional performance and durability. Its lightweight, corrosion-resistant properties make it ideal for challenging industrial settings.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 35mm |
| Outside Diameter | 111mm |
| Width | 21mm |
Designed for demanding industrial environments, this deep groove ball bearing features an inside diameter of 35mm, an outside diameter of 111mm, and a width of 21mm. Constructed from Aluminum 6061, it offers a superior strength-to-weight ratio, excellent corrosion resistance, and good thermal conductivity. This combination makes it particularly well-suited for applications where weight reduction and resistance to environmental factors are critical, such as in aerospace, marine, and food processing machinery, ensuring reliable operation under moderate loads and speeds.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft, applying even pressure to the inner ring. 3. Mount the assembly into the housing, ensuring a snug fit without excessive force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring during shaft installation. | Always apply installation force to the inner ring when mounting onto the shaft to prevent bearing damage. |
| Inadequate lubrication prior to initial operation. | Apply a light coating of appropriate lubricant to the bearing races and balls before installation and initial run. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Conveyor systems, Electric motors, Gearboxes.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||