Engineered from lightweight Aluminum 6061, this deep groove ball bearing offers excellent corrosion resistance and reduced rotational inertia. Its robust design ensures reliable performance in diverse power transmission systems.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 46mm |
| Outside Diameter | 184mm |
| Width | 27mm |
Manufactured under strict quality controls, this deep groove ball bearing features an inside diameter of 46mm, an outside diameter of 184mm, and a width of 27mm. Constructed from Aluminum 6061, it provides superior strength-to-weight ratio and excellent resistance to environmental degradation, making it ideal for applications demanding reduced mass and corrosion protection. Its precise internal geometry minimizes friction and heat generation, ensuring efficient power transfer and extended operational life in demanding industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing surfaces are clean and free from burrs. 2. Apply a light coating of appropriate lubricant to bearing races and shaft. 3. Carefully press the bearing onto the shaft, ensuring it seats squarely and fully. 4. Install the bearing and shaft assembly into the housing, applying even pressure.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to brinelling or damage to races. | Employ a proper bearing press or induction heater for controlled installation. Ensure the force is applied to the correct race. |
| Improper lubrication, resulting in premature wear and overheating. | Consult the bearing manufacturer's specifications for the correct type and amount of lubricant. Re-lubricate at recommended intervals. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Lightweight industrial gearboxes, Automotive power steering systems, Aerospace components requiring reduced mass.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||