This deep groove ball bearing, constructed from lightweight and corrosion-resistant Aluminum 6061, offers reduced rotational inertia. Its precise dimensions ensure smooth operation in demanding power transmission applications.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 16mm |
| Outside Diameter | 67mm |
| Width | 43mm |
A high-performance industrial component, this deep groove ball bearing features an inside diameter of 16mm, an outside diameter of 67mm, and a width of 43mm. The primary material, Aluminum 6061, provides excellent corrosion resistance, making it suitable for environments where traditional steel bearings might degrade. Its lower density compared to steel also contributes to reduced mass, a critical factor in applications requiring minimized rotational inertia and energy efficiency. This combination of material properties and precise dimensional control ensures reliable, low-friction performance in various power transmission systems, particularly where weight or corrosive conditions are a concern.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Carefully press or gently tap the outer ring of the bearing into the housing, ensuring it is seated squarely. 3. Mount the inner ring onto the shaft, applying even pressure until fully seated.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the bearing races during installation. | Use a bearing press or a controlled hammer tapping technique on the correct ring (outer for housing, inner for shaft) to avoid damaging the bearing raceways. |
| Installing the bearing in a contaminated environment. | Thoroughly clean the bearing, shaft, and housing before installation, and maintain a clean workspace to prevent contamination of the lubricant and raceways. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Aerospace components requiring lightweight solutions, Food and beverage processing equipment, Marine applications, Automated manufacturing systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||