This deep groove ball bearing, fabricated from lightweight and corrosion-resistant Aluminum 6061, offers superior performance in power transmission systems. Engineered for precision and durability, it ensures smooth operation and extended service life.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 23mm |
| Outside Diameter | 118mm |
| Width | 15mm |
Built to exacting engineering tolerances, this deep groove ball bearing features an inside diameter of 23mm, an outside diameter of 118mm, and a width of 15mm. The selection of Aluminum 6061 as the primary material provides an exceptional strength-to-weight ratio, enhanced corrosion resistance, and good thermal conductivity. This makes it ideal for environments where weight is a critical factor or where exposure to moisture or mild chemicals is anticipated. Its design accommodates moderate radial and axial loads, ensuring efficient power transfer in rotating machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free from debris. 2. Carefully press the bearing into its housing using a bearing press or appropriate fixture, applying even force to the outer ring. 3. Verify smooth rotation and proper seating after installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the inner ring during press-fitting into a housing. | Always apply force to the outer ring when pressing a bearing into a housing to avoid damaging the rolling elements or raceways. |
| Using improper lubrication or insufficient lubrication. | Consult the bearing manufacturer's recommendations for the correct type and quantity of lubricant to ensure optimal performance and longevity. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Lightweight industrial machinery, Aerospace components, Automotive power transmission systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||