This premium deep groove ball bearing, constructed from aerospace-grade Aluminum 6061, offers exceptional corrosion resistance and a superior strength-to-weight ratio for efficient power transmission in diverse industrial environments.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 23mm |
| Outside Diameter | 109mm |
| Width | 17mm |
Specified by design engineers worldwide, this deep groove ball bearing features a precise 23mm inside diameter, a robust 109mm outside diameter, and a 17mm width. Manufactured from Aluminum 6061-T6 alloy, it provides excellent machinability, corrosion resistance, and a high strength-to-weight ratio, making it ideal for applications where weight reduction and environmental resilience are critical. Its design accommodates moderate radial and axial loads, ensuring smooth operation and extended service life in demanding power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free of debris. 2. Carefully press the bearing onto the shaft using a bearing installer or a hydraulic press, applying even force to the inner race. 3. Gently seat the bearing into its housing, again ensuring uniform pressure on the outer race.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the wrong race during installation. | Always apply installation force to the same race that is being pressed onto the shaft or into the housing. |
| Improper lubrication leading to premature wear. | Use the recommended lubricant for the specific operating temperature and load conditions. Ensure even distribution during installation. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Lightweight industrial machinery, Aerospace components, Marine equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||