Engineered with lightweight Aluminum 6061, this deep groove ball bearing offers superior corrosion resistance and reduced rotational inertia. It's optimized for efficient power transmission in demanding applications.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 71mm |
| Outside Diameter | 126mm |
| Width | 9mm |
Designed for demanding industrial environments, this deep groove ball bearing features an inside diameter of 71mm, an outside diameter of 126mm, and a width of 9mm. Constructed from Aluminum 6061, it provides excellent strength-to-weight ratio, inherent corrosion resistance against various chemicals, and good thermal conductivity. This makes it ideal for applications where weight reduction and environmental resistance are critical, such as in aerospace, marine, and chemical processing equipment where traditional steel bearings may be unsuitable.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing surfaces are clean and free from debris. 2. Carefully align the bearing with the shaft and housing, applying even pressure. 3. Secure the bearing using appropriate retaining methods (e.g., snap rings, housings).
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper shaft or housing preparation, leading to binding or premature wear. | Thoroughly clean and inspect all mating surfaces for any imperfections before installation. |
| Applying excessive force or uneven pressure during installation, causing brinelling or damage to raceways. | Utilize a properly sized bearing installer or press, applying force only to the ring being fitted. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Lightweight power transmission systems, Corrosion-resistant machinery, Aerospace and marine equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||