This lightweight Deep Groove Ball Bearing, constructed from Aluminum 6061, offers exceptional corrosion resistance and reduced weight for efficient power transmission. Its precise dimensions ensure smooth operation in demanding environments.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 22mm |
| Outside Diameter | 99mm |
| Width | 24mm |
Engineered for reliability and performance, this Deep Groove Ball Bearing features an inside diameter of 22mm, an outside diameter of 99mm, and a width of 24mm. The Aluminum 6061 alloy provides a superior strength-to-weight ratio and excellent resistance to environmental degradation, making it ideal for applications where weight reduction and corrosion are critical factors. Its robust design handles radial and axial loads effectively, ensuring prolonged service life in moderate speed applications within its material limitations. This bearing is optimized for environments that may challenge standard steel bearings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free of debris. 2. Gently press the bearing into its housing, applying even pressure to the outer ring. 3. Verify smooth rotation after installation, checking for any binding or excessive noise.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force directly to the inner ring during installation. | Always apply installation force to the ring that is being fitted. For press-fit onto a shaft, apply force to the inner ring; for press-fit into a housing, apply force to the outer ring. |
| Using incorrect lubrication for the operating environment. | Consult lubrication charts to select grease or oil appropriate for the speed, temperature, and potential contaminants of the application. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Lightweight rotating machinery, Corrosive environment conveyors, Aerospace and marine power transmission.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||