This robust deep groove ball bearing, fabricated from corrosion-resistant Aluminum 6061, offers exceptional performance in challenging industrial settings. Its precise dimensions ensure smooth operation and extended service life.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 21mm |
| Outside Diameter | 163mm |
| Width | 31mm |
Designed for demanding industrial environments, this deep groove ball bearing features an inside diameter of 21mm, an outside diameter of 163mm, and a width of 31mm. Constructed from Aluminum 6061-T6, known for its excellent corrosion resistance and moderate strength-to-weight ratio, it is ideal for applications where exposure to moisture, chemicals, or saltwater is a concern. This material also offers good thermal conductivity, aiding in heat dissipation. The bearing's design allows it to accommodate moderate radial loads and axial loads in both directions, making it suitable for machinery in food processing, marine, chemical, and light manufacturing sectors.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing bore and shaft are clean and free of debris. 2. Apply a light coating of appropriate lubricant to the shaft and inner ring. 3. Carefully press the bearing onto the shaft, ensuring it is seated squarely and fully. 4. Install the housing, ensuring proper alignment with the bearing. 5. Secure the bearing in the housing according to manufacturer specifications, avoiding excessive force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto the shaft with impact, leading to brinelling or damage to the raceways. | Use a proper bearing installation tool or a controlled hydraulic press to apply force evenly to the inner ring only. |
| Incorrect lubrication, either insufficient or using the wrong type of lubricant, leading to premature wear. | Consult the lubricant manufacturer's recommendations for this specific bearing size and operating conditions. Ensure proper fill levels. |
| Misalignment during installation, causing uneven load distribution and premature bearing failure. | Verify that both the shaft and housing are perfectly aligned before and during the pressing operation. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Conveyor systems in corrosive environments, Pumps and mixers in chemical processing, Marine equipment and winches, Food and beverage processing machinery, Light-duty industrial automation.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||