This deep groove ball bearing, crafted from lightweight and corrosion-resistant Aluminum 6061, offers smooth and efficient rotational performance for critical power transmission systems.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 19mm |
| Outside Diameter | 57mm |
| Width | 8mm |
Manufactured under strict quality controls, this deep groove ball bearing features an inside diameter of 19mm, an outside diameter of 57mm, and a width of 8mm. Constructed from Aluminum 6061, it provides excellent strength-to-weight ratio, superior corrosion resistance compared to steel in certain environments, and good thermal conductivity. These attributes make it ideal for applications where weight reduction and resistance to mild chemical exposure are paramount. Its design ensures optimal load distribution and reduced friction, contributing to extended service life and reliable operation in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free of debris. 2. Carefully press the bearing onto the shaft, applying even pressure to the inner ring. 3. Secure the bearing housing, ensuring no excessive force is applied to the outer ring during assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring during shaft mounting. | Always apply mounting force exclusively to the inner ring when fitting the bearing onto the shaft. |
| Insufficient lubrication upon installation. | Ensure the bearing is adequately lubricated with the specified grease or oil before and during operation. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Lightweight industrial machinery, Robotics and automation, Aerospace components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||