This deep groove ball bearing, constructed from lightweight and corrosion-resistant Aluminum 6061, ensures smooth and reliable power transmission in diverse industrial settings.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 21mm |
| Outside Diameter | 64mm |
| Width | 42mm |
Designed for demanding industrial environments, this deep groove ball bearing features an inside diameter of 21mm, an outside diameter of 64mm, and a width of 42mm. The Aluminum 6061 alloy offers excellent corrosion resistance, making it suitable for applications exposed to moisture or mild chemicals. Its robust construction provides efficient load distribution for rotational movement, minimizing friction and wear. This bearing is engineered to withstand moderate radial and axial loads, contributing to extended equipment lifespan and reduced maintenance requirements in power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing surfaces are clean and free of debris. 2. Carefully press or tap the bearing onto the shaft, maintaining even pressure. 3. Gently press or tap the bearing into the housing, confirming proper seating.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or deformation of the races. | Use a bearing press or an appropriate soft-faced hammer and ensure even pressure distribution when seating the bearing. |
| Improper alignment of the bearing with the shaft or housing, causing premature wear and noise. | Verify that the bearing is seated squarely on the shaft and within the housing before applying significant load. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Conveyor Systems, Electric Motors, Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||