This high-performance deep groove ball bearing, constructed from lightweight yet robust Aluminum 6061, offers superior performance in power transmission systems. Its precise construction ensures smooth, low-friction operation.
| Standard | ASTM A106 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 12mm |
| Outside Diameter | 152mm |
| Width | 26mm |
Built to exacting engineering tolerances, this deep groove ball bearing boasts an inside diameter of 12mm, an outside diameter of 152mm, and a width of 26mm. The Aluminum 6061 alloy provides excellent corrosion resistance, a favorable strength-to-weight ratio, and good machinability, making it ideal for applications where weight reduction is critical without compromising structural integrity. Its design accommodates radial and axial loads, making it suitable for a wide range of power transmission machinery, including conveyors, agricultural equipment, and light industrial machinery.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the outer or inner ring respectively. 3. Verify smooth rotation and secure mounting before operating the equipment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the cage during installation. | Apply force only to the inner or outer ring, never the cage, to prevent premature bearing failure. |
| Improper shaft or housing fit. | Ensure the shaft and housing dimensions meet the specified tolerances to prevent brinelling or premature wear. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Lightweight Conveyor Systems, Agricultural Machinery, Industrial Automation Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||