This deep groove ball bearing, crafted from corrosion-resistant Aluminum 6061, offers reliable performance in lightweight power transmission systems. Its precise dimensions ensure smooth operation and efficient load bearing.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 78mm |
| Outside Diameter | 68mm |
| Width | 9mm |
A proven choice for industrial professionals, this deep groove ball bearing features an inside diameter of 78mm and an outside diameter of 68mm, with a width of 9mm. Constructed from Aluminum 6061, it provides excellent corrosion resistance and a lower density compared to steel alternatives, making it suitable for weight-sensitive applications. This bearing is engineered for moderate radial and axial loads, delivering smooth, low-friction rotation critical for efficient power transmission in environments where weight and material compatibility are key considerations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the shaft and housing bore thoroughly. 2. Gently press the outer ring of the bearing into the housing bore, ensuring it is seated squarely. 3. Carefully press the inner ring onto the shaft, verifying proper fit and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper shaft/bore preparation leading to brinelling. | Ensure both the shaft and housing bore are free of debris, burrs, and surface imperfections before installation. |
| Uneven pressing force causing misalignment or damage. | Utilize a bearing press or an appropriate jig to apply uniform pressure during installation, ensuring the bearing is seated evenly. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Lightweight conveyor systems, Automated machinery components, Robotics and actuator assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||