Engineered for robust power transmission, this Aluminum 6061 deep groove ball bearing offers exceptional corrosion resistance and a lightweight profile, ideal for challenging operational conditions.
| Standard | ISO 9001 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 47mm |
| Outside Diameter | 53mm |
| Width | 37mm |
Designed for demanding industrial environments, this deep groove ball bearing features an internal bore of 47mm, an external diameter of 53mm, and a width of 37mm. Constructed from Aluminum 6061, it provides superior resistance to corrosion and chemical attack, making it suitable for applications where traditional steel bearings may degrade. Its lightweight nature contributes to reduced overall system mass without compromising load-bearing capacity for moderate radial and axial loads. The precise machining ensures smooth rotational performance and extended service life in varied operating temperatures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free of debris. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the correct ring (inner for shaft, outer for housing). 3. Verify the bearing rotates freely after installation, with no binding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying impact force to the wrong ring during installation. | Always apply press force to the ring that is being fitted. For shaft mounting, press the inner ring; for housing mounting, press the outer ring. |
| Using excessive force or improper tools leading to brinelling. | Utilize a bearing press or a carefully selected socket for pressing. Avoid hammering directly on the bearing. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Material Handling Equipment, Lightweight Machinery, Corrosive Environment Conveyors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||