This robust Deep Groove Ball Bearing, constructed from corrosion-resistant Aluminum 6061, offers exceptional performance in power transmission systems. Its precise dimensions ensure smooth, reliable operation under load.
| Standard | DIN 933 |
| Material | Aluminum 6061 |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 46mm |
| Outside Diameter | 106mm |
| Width | 33mm |
Trusted by engineers across multiple sectors, this Deep Groove Ball Bearing boasts an inside diameter of 46mm, an outside diameter of 106mm, and a width of 33mm. Fabricated from Aluminum 6061, it provides a superior strength-to-weight ratio and inherent corrosion resistance, making it ideal for environments where traditional steel bearings may degrade. This material choice ensures longevity and consistent performance in applications requiring moderate radial and axial loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing bore are clean and free of debris. Verify dimensional conformity. 2. Carefully press the bearing onto the shaft or into the housing, applying even pressure to the correct ring (inner for shaft mounting, outer for housing mounting). 3. Secure the bearing with appropriate retaining methods (e.g., snap rings, retaining compounds), ensuring it is correctly seated and free to rotate.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the wrong ring during installation. | Always apply force to the ring that is being pressed onto its mating surface (inner ring onto shaft, outer ring into housing) to avoid damaging the bearing raceways. |
| Ignoring cleanliness of mating surfaces. | Thoroughly clean both the shaft and housing bore before installation to prevent contamination, which can lead to premature wear and bearing failure. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Electric Motors, Conveyor Systems, Industrial Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||