This robust deep groove ball bearing, constructed from lightweight and corrosion-resistant Aluminum 6061, is engineered for high-performance power transmission. Its precise dimensions ensure smooth operation and reduced wear in dynamic systems.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 10mm |
| Outside Diameter | 177mm |
| Width | 24mm |
Manufactured under strict quality controls, this deep groove ball bearing features an inside diameter of 10mm, an outside diameter of 177mm, and a width of 24mm. The Aluminum 6061 alloy provides excellent strength-to-weight ratio, superior corrosion resistance, and good machinability, making it ideal for applications where weight reduction and environmental durability are critical. Its design minimizes friction and supports radial and axial loads, ensuring reliable performance in demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure mounting surfaces are clean and free from debris. 2. Carefully press the bearing into its housing, applying even force to the outer ring. 3. Verify smooth rotation after installation and check for any binding.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force to the inner ring during press-fitting into the housing. | Always apply mounting force to the ring that is being press-fitted. For housing installation, force should be applied to the outer ring. |
| Contaminating the bearing surfaces with dirt or debris during handling or installation. | Keep bearing surfaces clean at all times. Use clean tools and handle with care. Consider using bearing mounting lubricants if specified. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Electric motor shafts, Conveyor systems, Industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||