This high-performance nylon deep groove ball bearing offers superior corrosion resistance and reduced weight compared to traditional steel bearings. Engineered for reliable power transmission in demanding environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 97mm |
| Outside Diameter | 200mm |
| Width | 8mm |
Specified by design engineers worldwide, this 97mm ID x 200mm OD x 8mm width deep groove ball bearing utilizes a robust, high-density nylon composite. This advanced material provides excellent chemical resistance against common industrial lubricants and solvents, along with inherent self-lubricating properties that minimize wear and extend operational life. Its lightweight nature significantly reduces system inertia, making it ideal for high-speed applications and where weight reduction is critical. The precise tolerances ensure smooth operation and efficient power transfer in conveyor systems, electric motors, and automated manufacturing equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing housing and shaft are clean and free of debris. 2. Apply a light, appropriate lubricant to the shaft and the inner ring of the bearing. 3. Carefully press or gently tap the bearing onto the shaft, ensuring it is seated squarely and fully.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, potentially damaging the nylon cage or raceways. | Use a bearing press or a soft-faced mallet for controlled, even pressure during mounting. |
| Using incompatible lubricants that can degrade the nylon material. | Consult the material data sheet for recommended lubricant compatibility. Avoid aggressive solvents. |
A: This Deep Groove Ball Bearing is manufactured from Nylon.
A: Conveyor Systems, Electric Motors, Automated Manufacturing Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||