This deep groove ball bearing features a robust nylon construction, offering excellent corrosion resistance and reduced weight. Optimized for efficient power transmission in specific low-load, high-speed environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 97mm |
| Outside Diameter | 166mm |
| Width | 38mm |
Precision-manufactured to tight tolerances, this deep groove ball bearing boasts an internal diameter of 97mm, an external diameter of 166mm, and a width of 38mm. The advanced polymer (nylon) construction provides inherent corrosion resistance, making it suitable for wet or chemically aggressive environments where traditional steel bearings would degrade. Its lightweight nature reduces inertial load, benefiting high-speed applications. The optimized raceway geometry ensures smooth operation and extended service life under specified load conditions. This bearing is engineered for applications demanding quiet operation and electrical insulation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing bore and shaft are clean and free of debris. 2. Gently press or hammer the outer ring into the housing, or the inner ring onto the shaft, ensuring even pressure. 3. Verify free rotation and proper seating of the bearing before applying load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overheating the nylon during press-fitting. | Use controlled, even pressure during installation; avoid excessive heat or impact. |
| Exposing the nylon bearing to excessive axial loads or impacts. | Adhere strictly to the specified load ratings; avoid shock loads and improper alignment. |
A: This Deep Groove Ball Bearing is manufactured from Nylon.
A: Conveyor systems in food processing, Automated manufacturing equipment, Material handling with corrosive elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||