This deep groove ball bearing, crafted from corrosion-resistant Aluminum 6061, offers reliable performance in light-duty power transmission. Its precise dimensions ensure smooth operation and extended service life.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 95mm |
| Outside Diameter | 36mm |
| Width | 34mm |
Built to exacting engineering tolerances, this deep groove ball bearing features an inside diameter of 95mm, an outside diameter of 36mm, and a width of 34mm. The Aluminum 6061 alloy provides excellent corrosion resistance and a lightweight profile, making it suitable for environments where traditional steel bearings may degrade. This material also offers good machinability, contributing to the bearing's overall precision. The deep groove raceway design accommodates both radial and axial loads, ensuring versatile application in various power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing bore and shaft are clean and free of debris. 2. Carefully press the bearing onto the shaft, applying even pressure to the inner race. 3. Secure the bearing in its housing, ensuring it is seated properly without excessive force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer race during shaft installation. | Always apply force exclusively to the inner race when mounting the bearing onto the shaft. |
| Over-tightening the bearing in its housing, leading to pre-load. | Ensure the bearing is properly seated but avoid excessive clamping that can induce unwanted pre-load. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Light-duty conveyor systems, Small pump shafts, General machinery power transmission.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||