This robust Deep Groove Ball Bearing, constructed from lightweight yet strong Aluminum 6061, offers exceptional performance in power transmission systems. Engineered for smooth operation and durability, it's a reliable choice for demanding industrial environments.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 95mm |
| Outside Diameter | 37mm |
| Width | 48mm |
Manufactured under strict quality controls, this deep groove ball bearing boasts an internal diameter of 95mm, an external diameter of 37mm, and a width of 48mm. The choice of Aluminum 6061 provides a superior strength-to-weight ratio, excellent corrosion resistance, and good thermal conductivity, making it suitable for applications where weight reduction or non-magnetic properties are beneficial. Its design ensures efficient load distribution and low friction, contributing to extended operational life in various power transmission scenarios.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the bearing seat and shaft thoroughly to remove any debris or contaminants. 2. Carefully align the bearing with the shaft and gently press it into place, ensuring it seats evenly. 3. Secure the bearing using appropriate locking mechanisms, such as retaining rings or set screws, as per the equipment design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto the shaft without proper alignment. | Always ensure perfect alignment before applying any force to prevent cage damage or brinelling of the races. |
| Using incorrect lubrication or insufficient lubrication. | Refer to the equipment manufacturer's specifications for the correct type and amount of lubricant. Over or under-lubrication can lead to premature failure. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Electric Motors, Gearboxes, Conveyor Systems, Pumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||