Engineered for lightweight, high-performance power transmission, this deep groove ball bearing features a durable Aluminum 6061 construction, offering superior corrosion resistance and reduced rotational mass.
| Standard | ASME B18 |
| Material | Aluminum 6061 |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 95mm |
| Outside Diameter | 107mm |
| Width | 6mm |
Built to exacting engineering tolerances, this deep groove ball bearing boasts an internal diameter of 95mm, an external diameter of 107mm, and a width of 6mm. Constructed from Aluminum 6061, it provides exceptional strength-to-weight ratio and excellent resistance to environmental degradation, making it ideal for applications where weight reduction and non-magnetic properties are critical. The precise raceway geometry ensures smooth operation and efficient load distribution under moderate radial and axial forces, suitable for machinery in corrosive or chemically active environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean bearing and mounting surfaces thoroughly. 2. Apply a thin, even layer of appropriate lubricant to the bearing bore and shaft. 3. Carefully press or slide the bearing onto the shaft, ensuring it is seated fully and squarely against the housing shoulder.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation | Employ a controlled press fit or bearing heater/chiller for proper temperature expansion/contraction during mounting. |
| Contaminating the bearing during handling | Keep the bearing sealed in its packaging until just before installation and handle with clean, lint-free gloves. |
A: This Deep Groove Ball Bearing is manufactured from Aluminum 6061.
A: Lightweight drive systems, Corrosion-prone environments, Non-magnetic machinery components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||