Engineered for exceptional performance, this brass deep groove ball bearing delivers robust power transmission. Its durable brass construction ensures reliability and extended service life in demanding industrial applications.
| Standard | DIN 933 |
| Material | Brass |
| Finish | Black Oxide |
| Grade | N/A |
| Inside Diameter | 94mm |
| Outside Diameter | 181mm |
| Width | 41mm |
Built to exacting engineering tolerances, this deep groove ball bearing features an inside diameter of 94mm, an outside diameter of 181mm, and a width of 41mm. Constructed from high-grade brass, it offers excellent corrosion resistance and good thermal conductivity, making it ideal for environments where moisture or moderate heat is present. The deep groove raceway design facilitates high rotational speeds and accommodates both radial and axial loads efficiently, ensuring smooth and dependable operation in critical power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean the bearing housing and shaft to remove any debris or contaminants. 2. Gently press or lightly tap the outer ring of the bearing into its housing, ensuring it is seated square and flush. 3. Carefully align the shaft with the inner ring and press or tap the bearing onto the shaft until it is fully seated.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or damage to the raceways. | Utilize a proper bearing press or a soft-faced hammer for installation. Apply force evenly and only to the ring that needs to be seated. |
| Contaminating the bearing during installation, such as with dirt, dust, or metal shavings. | Install the bearing in a clean environment. Keep bearing packaging sealed until just before installation and use clean tools and hands. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Electric Motors, Gearboxes, Conveyor Systems, Industrial Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||