Engineered for superior performance in power transmission, this brass deep groove ball bearing offers exceptional durability and corrosion resistance. Its precise dimensions ensure smooth operation in demanding industrial environments.
| Standard | ASTM A106 |
| Material | Brass |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 93mm |
| Outside Diameter | 74mm |
| Width | 46mm |
Manufactured under strict quality controls, this deep groove ball bearing features an inside diameter of 93mm, an outside diameter of 74mm, and a width of 46mm. Constructed from high-grade brass, it exhibits excellent resistance to corrosion and is suitable for environments where non-sparking properties are beneficial. The robust design ensures optimal load-bearing capacity and extended service life, making it a reliable choice for various industrial machinery and power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing surfaces are clean and free of debris. 2. Carefully press or mount the bearing onto the shaft, applying even pressure to the inner ring. 3. Mount the assembly into the housing, ensuring proper alignment and applying even pressure to the outer ring.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Copper (Cu) | 60.0 - 63.0% |
| Zinc (Zn) | Balance |
| Lead (Pb) | 2.5 - 3.7% |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the outer ring when mounting onto the shaft. | Always apply mounting force to the inner ring when fitting the bearing onto the shaft to prevent damage to the raceways and balls. |
| Improper lubrication or contamination during installation. | Use the recommended lubricant and ensure the bearing and surrounding environment are clean during installation to prevent premature failure. |
A: This Deep Groove Ball Bearing is manufactured from Brass.
A: Industrial Gearboxes, Conveyor Systems, Electric Motors.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||