This high-performance carbon steel deep groove ball bearing offers exceptional durability and smooth operation. Engineered for precision, it ensures reliable power transmission in a wide range of demanding industrial environments.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 92mm |
| Outside Diameter | 117mm |
| Width | 33mm |
Specified by design engineers worldwide, this carbon steel deep groove ball bearing (6219 series) boasts an inside diameter of 92mm, an outside diameter of 117mm, and a width of 33mm. Constructed from robust carbon steel, it provides excellent hardness, wear resistance, and load-bearing capacity, making it suitable for high-speed applications with moderate radial and axial loads. Its raceway geometry is optimized for minimal friction and heat generation, ensuring extended service life and operational efficiency in critical power transmission systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing bore are clean and free of debris. 2. Carefully press the bearing onto the shaft, ensuring it is seated square and without excessive force. 3. Install the bearing into the housing, again ensuring proper alignment and avoiding hammering.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or damage to the raceways. | Use a proper bearing press or induction heater for installation. Apply force evenly and only to the ring being fitted. |
| Incorrect lubrication, leading to premature wear or overheating. | Consult the bearing manufacturer's specifications for the correct lubricant type and quantity for the operating conditions. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Pumps, Gearboxes, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||