This robust Nylon Deep Groove Ball Bearing (89x115x8mm) offers exceptional corrosion resistance and lightweight operation. Engineered for high-speed, low-load power transmission, it ensures smooth, reliable performance in diverse industrial settings.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 89mm |
| Outside Diameter | 115mm |
| Width | 8mm |
Engineered for reliability and performance, this deep groove ball bearing features an 89mm inside diameter, a 115mm outside diameter, and a 8mm width. Constructed from high-performance nylon, it exhibits excellent chemical resistance and a low coefficient of friction, making it suitable for applications where lubrication is minimal or undesirable. Its lightweight nature and non-conductive properties further enhance its utility in specialized environments. Designed for moderate radial loads and low axial loads, this bearing excels in applications requiring high rotational speeds and quiet operation, such as conveyors, small machinery, and material handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing are clean and free of debris. 2. Carefully press the bearing onto the shaft, ensuring it is seated squarely. 3. Mount the assembly into the housing, applying even pressure to avoid misalignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during installation, leading to brinelling or deformation. | Use a proper bearing press or gentle hammering with a soft mallet on the inner ring only, ensuring even distribution of force. |
| Misalignment during mounting, causing premature wear and operational issues. | Verify the shaft and housing are perfectly aligned before pressing the bearing into place. Use a torque wrench for controlled tightening if applicable. |
A: This Deep Groove Ball Bearing is manufactured from Nylon.
A: Conveyor Systems, Material Handling Equipment, Lightweight Robotics.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||