This robust carbon steel deep groove ball bearing, with an 86mm inside diameter, 49mm outside diameter, and 30mm width, is engineered for exceptional load-bearing capacity and smooth rotational performance in critical power transmission systems.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 86mm |
| Outside Diameter | 49mm |
| Width | 30mm |
Specified by design engineers worldwide, this deep groove ball bearing is manufactured from high-grade carbon steel, offering superior hardness and wear resistance for extended service life under radial and axial loads. Its precise internal geometry and tight tolerances (86mm ID, 49mm OD, 30mm W) ensure minimal friction and optimal operational efficiency in high-speed, moderate-to-heavy load environments. The material's inherent strength makes it ideal for applications subjected to shock loads and demanding operating conditions, providing reliable power transfer and reduced maintenance intervals.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the shaft and housing surfaces are clean, free of burrs, and properly lubricated. 2. Carefully press the bearing onto the shaft or into the housing using appropriate tooling, applying even pressure. 3. Verify smooth rotation by hand after installation to confirm proper seating and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying excessive force during press-fitting, leading to brinelling or cage damage. | Use a bearing press or a properly sized sleeve to apply force only to the ring being fitted. |
| Contamination during installation, introducing grit or debris into the bearing raceways. | Work in a clean environment and avoid direct contact with bearing raceways and seals. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Gearboxes, Conveyor Systems, Agricultural Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||