Engineered for efficient power transmission, this deep groove ball bearing features a durable nylon construction. Its specific dimensions offer precise integration into a variety of mechanical systems, ensuring reliable performance.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Inside Diameter | 84mm |
| Outside Diameter | 181mm |
| Width | 7mm |
Manufactured under strict quality controls, this deep groove ball bearing boasts an 84mm inside diameter, an 181mm outside diameter, and a precise 7mm width. Constructed from high-grade nylon, it offers exceptional lightweight properties, superior corrosion resistance, and excellent dielectric strength, making it suitable for environments where lubrication is limited or contamination is a concern. The material's inherent low friction coefficient contributes to reduced energy loss and enhanced operational efficiency, particularly in applications requiring high rotational speeds and moderate load capacities.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seat and shaft are clean and free from debris. Use a bearing puller or press for proper insertion. 2. Gently and evenly apply force to the outer ring during installation to avoid damaging the raceways or rolling elements. 3. Verify free rotation after installation to confirm proper seating and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Applying force to the inner ring when mounting on the shaft or the outer ring when mounting in the housing. | Always apply force to the ring that is being pressed onto its mating component to prevent damage to the bearing. |
| Incorrect shaft or housing fit, leading to premature wear or failure. | Ensure the shaft and housing dimensions adhere to the specified tolerances for the chosen bearing and application. |
A: This Deep Groove Ball Bearing is manufactured from Nylon.
A: Conveyor Systems, Automated Machinery, Lightweight Rotating Assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||