This 83mm ID, 132mm OD, 6mm wide deep groove ball bearing, crafted from robust carbon steel, delivers exceptional performance and longevity for critical power transmission applications.
| Standard | ASME B18 |
| Material | Carbon Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Inside Diameter | 83mm |
| Outside Diameter | 132mm |
| Width | 6mm |
A proven choice for industrial professionals, this deep groove ball bearing boasts an inside diameter of 83mm and an outside diameter of 132mm, with a slim 6mm width. Constructed from high-quality carbon steel, it offers superior hardness, wear resistance, and load-bearing capacity. The precision-engineered raceways and balls ensure smooth rotational performance, minimizing friction and heat generation under continuous operation. This design is ideal for applications demanding high radial and axial loads, such as industrial machinery, electric motors, and agricultural equipment, where reliability and efficiency are paramount. Its robust material composition contributes to extended service life even in challenging operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure bearing seat and shaft are clean and free from debris. 2. Carefully align the bearing with the shaft and gently press or tap it into place using an appropriate bearing installer or soft-faced hammer. 3. Verify smooth rotation and proper seating before applying load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto the shaft or into the housing without proper alignment. | Use a bearing press or a properly sized socket and soft-faced hammer for controlled and even seating. Ensure the shaft and housing are chamfered if necessary. |
| Contaminating the bearing during installation. | Handle bearings with clean hands or gloves and install them in a clean environment. Avoid exposure to dust, dirt, or moisture. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Industrial Gearboxes, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||