Engineered for robust performance, this carbon steel deep groove ball bearing offers exceptional load-bearing capacity and smooth rotational efficiency in power transmission systems, ensuring operational reliability.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Anodized |
| Grade | N/A |
| Inside Diameter | 83mm |
| Outside Diameter | 84mm |
| Width | 24mm |
Precision-manufactured to tight tolerances, this carbon steel deep groove ball bearing boasts an inside diameter of 83mm, an outside diameter of 84mm, and a width of 24mm. Constructed from high-grade carbon steel, it exhibits excellent hardness, wear resistance, and compressive strength, making it suitable for high-speed rotational applications and moderate axial loads. The raceway geometry is optimized for a balanced distribution of radial and axial forces, minimizing friction and heat generation. Its robust construction ensures longevity and consistent performance under demanding industrial conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure shaft and housing surfaces are clean and free of burrs or contaminants. 2. Apply a thin, even layer of appropriate lubricant to the bearing bore and shaft or housing seat. 3. Carefully press or install the bearing using a proper bearing installation tool, ensuring even pressure is applied to the outer ring for housing installation and the inner ring for shaft installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force or impact during installation. | Always use a proper bearing installation tool or a hydraulic press to apply even pressure to the correct ring (inner for shaft, outer for housing). |
| Contaminating the bearing during handling or installation. | Keep the bearing in its original packaging until immediately before installation. Handle with clean hands or appropriate tools. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Industrial Gearboxes, Electric Motor Shafts, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||