Engineered from robust carbon steel, this deep groove ball bearing offers exceptional durability and smooth operation for demanding power transmission applications. Its precise dimensions ensure optimal fit and performance.
| Standard | ISO 9001 |
| Material | Carbon Steel |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 81mm |
| Outside Diameter | 150mm |
| Width | 12mm |
A proven choice for industrial professionals, this deep groove ball bearing features an 81mm inside diameter, a 150mm outside diameter, and a 12mm width. Constructed from high-grade carbon steel, it provides excellent hardness, wear resistance, and load-carrying capacity suitable for continuous operation. The optimized internal geometry of the deep groove design accommodates significant radial and axial loads, making it ideal for high-speed machinery, electric motors, pumps, and general industrial equipment where reliable power transmission is critical. Its inherent simplicity and cost-effectiveness also contribute to its widespread adoption.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing seat and shaft are clean and free from debris. 2. Carefully align the bearing with the shaft or housing, applying even pressure. 3. Use an appropriate press or sleeve to gently seat the bearing until fully engaged.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing onto an improperly aligned shaft. | Always ensure perfect alignment before applying any force during installation to prevent brinelling or housing damage. |
| Using excessive heat to install the outer ring in a housing. | When heating the housing, use controlled induction heating or an oil bath at a temperature not exceeding 120°C (250°F) to avoid altering the bearing's temper. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Electric Motors, Pumps and Compressors, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||