Engineered with a durable nylon construction, this deep groove ball bearing offers superior corrosion resistance and quiet operation for demanding power transmission systems. Its robust design ensures reliable performance in diverse environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Inside Diameter | 80mm |
| Outside Diameter | 143mm |
| Width | 18mm |
Built to exacting engineering tolerances, this deep groove ball bearing features an 80mm inside diameter, a 143mm outside diameter, and an 18mm width. The high-performance nylon material provides excellent chemical resistance, reduced friction, and inherent lubricity, making it ideal for applications where traditional steel bearings might corrode or require frequent lubrication. Its lightweight nature and non-conductive properties further enhance its suitability for specialized industrial environments. The precise geometry ensures optimal load distribution and extended service life, even under moderate radial and axial loads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating shaft and housing surfaces are clean and free from debris. 2. Carefully press the bearing onto the shaft, ensuring it seats fully and squarely. 3. Gently press the assembly into the housing, verifying proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Forcing the bearing with excessive, uneven force during installation. | Use a controlled press or a proper bearing installer tool to apply uniform force, ensuring the load is distributed through the bearing's outer ring or onto the shaft. |
| Failure to verify shaft and housing dimensions before installation. | Always confirm that the shaft diameter and housing bore are within the specified tolerance ranges for the bearing to prevent premature wear or seizure. |
A: This Deep Groove Ball Bearing is manufactured from Nylon.
A: Conveyor systems, Material handling equipment, Food processing machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||