Engineered for superior performance, this deep groove ball bearing features a robust carbon steel construction. Its precise dimensions ensure smooth operation and high load-carrying capacity in critical power transmission systems.
| Standard | ASTM A106 |
| Material | Carbon Steel |
| Finish | Passivated |
| Grade | N/A |
| Inside Diameter | 76mm |
| Outside Diameter | 172mm |
| Width | 18mm |
Trusted by engineers across multiple sectors, this 76mm bore, 172mm outside diameter, and 18mm width deep groove ball bearing is manufactured from high-grade carbon steel. This material selection offers excellent hardness, wear resistance, and dimensional stability under radial and axial loads. Its design minimizes friction, allowing for efficient power transfer in applications such as industrial machinery, electric motors, and agricultural equipment where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the bearing housing and shaft are clean and free of contaminants. 2. Apply a thin, even layer of appropriate lubricant to the bearing's rolling elements and raceways. 3. Carefully press the bearing onto the shaft or into the housing, ensuring it seats squarely and without excessive force.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Carbon (C) | 0.28 - 0.55% |
| Manganese (Mn) | 0.60 - 0.90% |
| Phosphorus (P) | 0.04% max |
| Sulfur (S) | 0.05% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, leading to brinelling or damage to the raceways. | Utilize a bearing press or appropriate induction heater for controlled installation. Never strike the bearing directly. |
| Improper lubrication, either insufficient or using the wrong lubricant type. | Refer to the manufacturer's lubrication recommendations for the specific operating conditions and ensure a consistent lubricant film. |
A: This Deep Groove Ball Bearing is manufactured from Carbon Steel.
A: Industrial Gearboxes, Electric Motor Shafts, Conveyor Systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||